GENERAL CAUTIONS

Ratings or Working Load Limits (WLL) shown in Absolute Lifting and Safety literature apply only to new or as new condition products. The working load limit can be affected by intentional alterations, damage, corrosion, misuse, and special conditions of use. Always have your pipe hooks regularly inspected by a competent person who may suggest repairs or condemn your pipe hooks should anything such as the above cause a reduction in the WLL.

Shock, and/or unusual loading can greatly increase the actual loads placed upon the ALS Pipe Lifter. Extraordinary conditions and environments must be considered when selecting products

for use in pipe hook systems. This hook has been designed for normal lifting environments.

The WLL which applies for any ALS Pipe Lifter applies only for uses compliant with AS4991-2004. The WLL applies only to the structural integrity of the ALS Pipe Lifter itself. Use with a some payloads and/or slings may reduce the ALS Pipe Lifter’s capacity.

Lifting bars, must always be correctly selected and fitted for every lift. Attention must be paid to the security of the pipe lifter, the load capacity available and the proximity of any hazards.

Never weld any part of an ALS Pipe Lifter.

The ALS Pipe Lifter shall only be used as described in the operating instructions and must only be used by a competent person.

The ALS Pipe Lifter is made from high-grade steel and has been tested and certified to AS 4991.

A site and/or job specific hazard & risk assessment is recommended prior to use.

 

ALS PIPE LIFTER CONDITIONS OF USE

Absolute Lifting and Safety advises a risk assessment to be undertaken prior to use, and all lifting equipment must be tested and tagged in date by a competent person to the standards and regulations within Australia.

The ALS Pipe Lifter should only be used to lift pipes to the set capacity of the pipe lifting bar, options include 3, and 5 tonnes. Appropriate PPE, including industry-standard gloves, should be worn when using this product.

When using the ALS Pipe Lifter the safety and stability of the load is of utmost importance. The pipe section to be lifted must be of a known mass and have a centre of gravity about the geometric centre.

The ALS Pipe Lifter is only as good as the integrity of its payload. The pipe to be lifted must have sufficient strength to be able to be lifted by the region in contact with the pipe lifter. The ALS Pipe Lifter is generally suitable for concrete pipes with lifting holes.

Pipes which are damaged need to be assessed as suitable for lifting. The ALS Pipe Lifter cannot be used if the pipe is damaged.

The pipe lifting bar must not be side loaded and is only designed for the vertical lifting and loading of pipes.

The use of ALS Pipe Lifter requires the pipe lifting bar to be maintained in a vertical position as the load is taken up. Additional personnel may be required. These personnel shall be adequately trained and licensed for this work and must stand clear of the load before it is lifted off its supporting surface(s).

Users shall ensure that the pipe is placed onto chocks or similar, and upon level ground so that the pipe does not shift as it is set down which may cause a dangerous situation. Once set down, ensure that the payload is secure and unable to roll or slide out of position.

 

WARNING

Improper use of this product could result in death or serious injury.

• Never exceed the working load limit.
• Never hoist loads over or near people.
• Always operate, inspect, and maintain this equipment in accordance with relevant safety standards.
• Never use in proximity to live equipment.
• If you are ever in doubt how to safely use this product contact Absolute Lifting and Safety for advice - Don’t Guess!
• Slings, and other lifting accessories used must be of the appropriate size and in good, safe working order and condition.
• Always ensure that the pipe lifting bar is properly and securely fitted prior to use.
• Always ensure the suitability of the payload prior to lifting.
• Always ensure that the payload is set down into a secure position, unable to roll or slide out of place.
• Always ensure that personnel are properly trained and competent for use of these devices. Keep personnel clear during lifting.